Keysight CX3322A - Page 47

Keysight Technologies
CX3300 Current Waveform Analyzer
Quick Operation Guide
How to analyze the waveform in the specified area with an Area marker
1. Turn the Marker ON.
1-1. Click the “Display” icon on the Tool Palette.
1-2. Select “Markers”.
1-3. Drag and drop the “Area” icon on the Display tool palette onto the
specified area on the waveform.
1-1
1-2
1-3
There are four types of Area markers as follows; Area, Area (+width), Area (-width)
and Area (period).
Using the mouse drag and drop option, the Area marker allows you to freely
change the area range.
Using Area, Area (+width), Area (-width) and Area (period) marker, the area is
automatically determined according to where you drag and drop the marker.
[ Apply the “Area” marker ]
47