2-1
2-2
2. Perform the Auto Profile (Optional)
- The Auto Profile function can be used to help divide the segments
into levels to view the vertical level difference. You can also manually
adjust the levels of the segments.
2-1. Click the “Auto Profile” button to open the Auto Profile window.
2-2. Check the Condition
- Set the number of levels that you want to divide the segments
into for the Number of Y Levels.
- Set a resolution that is lower than the minimum resolution that
you want to divide into levels for the Y Step Resolution.
- Set the time which you want not to divide the different
segments for X Step Resolution.
To divide 7 levels
Ignore <40 s Do not ignore >140 s
Example
Min. ~200 $
of peak-to-peak of
the waveform
51
To Next Page
Loading...
