Keysight E3633A - Page 159

Error Messages 5
Keysight E3633A and E3634A User’s Guide 159
-123
Numeric overflow
A numeric parameter was found whose exponent was larger than 32,000.
-124
Too many digits
A numeric parameter was found whose mantissa contained more than 255
digits, excluding leading zeros.
-128
Numeric data not allowed
A numeric parameter was received but a character string was expected.
Example:
DISP:TEXT 123
-130
[a]
Suffix error
A suffix was incorrectly specified for a numeric parameter. You may have
misspelled the suffix or the numeric parameter does not accept a suffix.
Example:
TRIG:DEL 0.5 SECS
-131
Invalid suffix
A suffix was incorrectly specified for a numeric parameter. You may have
misspelled the suffix.
Example:
TRIG:DEL 0.5 SECS
-134
Suffix too long
A suffix for a numeric parameter contained too many characters.
-138
Suffix not allowed
A suffix was received following a numeric parameter which does not accept a
suffix.
Example:
STAT:QUES:ENAB 18 SEC (SEC is not a valid suffix).
[a] This error message is only applicable for serial MY53xx6xxx.