1General Information
28 Keysight E3633A and E3634A User’s Guide
The power supply is shipped with a detachable, 3-wire grounding type power
cord.The ac line fuse is an extractor type on the rear panel. The power supply can
be calibrated from the front panel directly or with a controller over the GPIB or
RS-232 interface using calibration commands. Correction factors are stored in
nonvolatile memory and are used during output programming. Calibration from
the front panel or a controller eliminate the need to remove the top cover or even
the need to remove the power supply from your system cabinet. You can guard
against unauthorized calibration by using the “Secured” calibration protection
function.
To Next Page
Loading...
