Front-Panel Operation 3
Keysight E3633A and E3634A User’s Guide 83
5 Save the change and turn off the I/O configuration mode.
The RS-232 baud rate and parity selections are stored in non-volatile memory,
and does not change when power has been off or after a remote interface
reset. The power supply displays a message to show that the change is now in
effect. If the baud rate and the parity are not changed, “NO CHANGE” will be
displayed for one second.
CHANGE SAVED
To exit the I/O configuration mode without any further changes, press the “I/O
Config” key until the “NO CHANGE” message is displayed.
To Next Page
Loading...
