Keysight M8195A - Page 26

AXle Chassis
26 M8195A Getting Started Guide
1
PCle
Connects a host PC to the chassis via PCle.
2
USB
Connects a host PC to the chassis via USB 2.0. The USB 2.0 port is
only available for AXIe chassis with option -U20.
3
Multiframe Input
Synchronizes timing signals with multiple daisy-chained chassis.
4
Multiframe Output
5
Trigger In
External Trigger connections.
The Trigger In of the AXIe ESM cannot be used to trigger the M8195A.
The M8195A has its own Trigger In.
The Trigger Out of the AXIe ESM cannot be controlled by the M8195A.
6
Trigger Out
7
Clock In
External clock connections.
8
Clock Out
9
LAN
Connects the host PC to the chassis, via 10/100/1000 Ethernet.
In particular, the LAN connector is used for ESM configuration, but
NOT to communicate to the M8195A.
10
Status Light
Indicates the chassis status.