Verification and Calibration Appendix B
Series N8700 User’s Guide 109
Test Record – Keysight N8733A [15V, 220A, 3.3kW]
Keysight N8733A
Description
Report No _______________ Date __________________
Minimum Specs. Results Maximum Specs.
Voltage Programming & Readback
Minimum Voltage Vout
Measurement Readback
High Voltage Vout
Measurement Readback
30 mV
Vout − 15 mV
14.985 V
Vout − 30 mV
_____________
_____________
_____________
_____________
45 mV
Vout + 15 mV
15.015 V
Vout + 30 mV
CV Load Effect − 7.3 mV _____________ + 7.3 mV
CV Source Effect − 3.5 mV _____________ + 3.5 mV
CV Ripple and Noise
peak-to-peak
rms
N/A
N/A
_____________
_____________
60 mV
8 mV
Transient Response
Voltage @ 1 ms
− 75 mV
_____________
+ 75 mV
Current Programming & Readback
Minimum Current Iout
Measurement Readback
High Current Iout
Measurement Readback
0.88 A
Iout − 660 mA
219.34 A
Iout − 880 mA
_____________
_____________
_____________
_____________
1.76 A
Iout + 660 mA
220.66 A
Iout + 880 mA
CC Load Effect − 49 mA _____________ + 49 mA
CC Source Effect − 24 mA _____________ + 24 mA
WARNING
Return the voltage and current settings to zero when verification is completed
Test Description N8733A Settings
Voltage Programming & Readback, Min Voltage 37.5 mV, 1.32 A
Voltage Programming & Readback, High Voltage 15V, 1.32 A
CV Load Effect, Source Effect, Ripple and Noise 15V, 220 A
Transient Response 15V, from 22A to 198A
Current Programming & Readback, Min Current 1.32 A, 15V
Current Programming & Readback, High Current 220A, 15V
CC Load Effect, Source Effect 220A, 15V
N8733A Load Requirements
Current shunt
0.001
W 300A
Keysight N3300 Electronic load modules 6 – N3306A
Fixed Resistor for CV Ripple and Noise
0.068
W 3.5 kW
To Next Page
Loading...
