Need help?Do you have a question about the Keysight U8002A and is the answer not in the manual?
General| Output Voltage | 0 to 30 V |
|---|---|
| Power Rating | 60 W |
| Number of Outputs | 1 |
| Display | LCD |
| Output Current | 0 to 3 A |
| Communication Interface | USB |
| Current Range | 0 to 3 A |
Procedures to check basic voltage and current functions.
Troubleshooting steps for power-on issues.
Steps to perform the constant voltage (CV) output mode.
Steps to perform the constant current (CC) output mode.
How to set trip levels and enable/disable OVP.
How to set trip levels and enable/disable OCP.
Checklist of common failures and troubleshooting steps.
Procedures to verify performance and adjust calibration.
To Next Page