Verification and Calibration Appendix B
Series N8700 User’s Guide 111
Test Record – Keysight N8735A [30V, 110A, 3.3kW]
Keysight N8735A
Description
Report No _______________ Date __________________
Minimum Specs. Results Maximum Specs.
Voltage Programming & Readback
Minimum Voltage Vout
Measurement Readback
High Voltage Vout
Measurement Readback
60 mV
Vout − 30 mV
29.97 V
Vout − 60 mV
_____________
_____________
_____________
_____________
90 mV
Vout + 30 mV
30.03 V
Vout + 60 mV
CV Load Effect − 9.5 mV _____________ + 9.5 mV
CV Source Effect − 5 mV _____________ + 5 mV
CV Ripple and Noise
peak-to-peak
rms
N/A
N/A
_____________
_____________
60 mV
8 mV
Transient Response
Voltage @ 1 ms
− 150 mV
_____________
+ 150 mV
Current Programming & Readback
Minimum Current Iout
Measurement Readback
High Current Iout
Measurement Readback
440 mA
Iout −330 mA
109.67 A
Iout − 440 mA
_____________
_____________
_____________
_____________
880 mA
Iout + 330 mA
110.33 A
Iout + 440 mA
CC Load Effect − 27 mA _____________ + 27 mA
CC Source Effect − 13 mA _____________ + 13 mA
WARNING
Return the voltage and current settings to zero when verification is completed
Test Description N8735A Settings
Voltage Programming & Readback, Min Voltage 75 mV, 660 mA
Voltage Programming & Readback, High Voltage 30V, 660 mA
CV Load Effect, Source Effect, Ripple and Noise 30V, 110 A
Transient Response 30V, from 11A to 99A
Current Programming & Readback, Min Current 660 mA, 30V
Current Programming & Readback, High Current 110A, 30V
CC Load Effect, Source Effect 110A, 30V
N8735A Load Requirements
Current shunt
0.01
W 100 A
Keysight N3300 Electronic load modules 6 – N3306A
Fixed Resistor for CV Ripple and Noise
0.27
W 3.5 kW
To Next Page
Loading...
