Keysight N8700 - Page 125

Verification and Calibration Appendix B
Series N8700 User’s Guide 125
Test Record – Keysight N8760A [150V, 34A, 5kW]
Keysight N8760A
Description
Report No _______________ Date __________________
Minimum Specs. Results Maximum Specs.
Voltage Programming & Readback
Minimum Voltage Vout
Measurement Readback
High Voltage Vout
Measurement Readback
300 mV
Vout – 187.5 mV
149.85 V
Vout − 225 mV
_____________
_____________
_____________
_____________
525 mV
Vout + 187.5 mV
150.15 V
Vout + 225 mV
CV Load Effect − 27.5 mV _____________ + 27.5 mV
CV Source Effect − 15 mV _____________ + 15 mV
CV Ripple and Noise
peak-to-peak
rms
N/A
N/A
_____________
_____________
120 mV
25 mV
Transient Response
Voltage @ 2 ms − 750 mV _____________ + 750 mV
Current Programming & Readback
Minimum Current Iout
Measurement Readback
High Current Iout
Measurement Readback
136 mA
Iout − 102 mA
33.864 A
Iout − 136 mA
_____________
_____________
_____________
_____________
340 mA
Iout + 102 mA
34.136 A
Iout + 136 mA
CC Load Effect − 34 mA _____________ + 34 mA
CC Source Effect − 17 mA _____________ + 17 mA
WARNING
Return the voltage and current settings to zero when verification is completed
Test Description N8760A Settings
Voltage Programming & Readback, Min Voltage 412.5mV, 238mA
Voltage Programming & Readback, High Voltage 150V, 238mA
CV Load Effect, Source Effect, Ripple and Noise 150V, 34A
Transient Response 150V, from 3.4A to 30.6A
Current Programming & Readback, Min Current 238mA, 150V
Current Programming & Readback, High Current 34A, 150V
CC Load Effect, Source Effect 34A, 150V
N8760A Load Requirements
Current shunt
0.01
W 100 A
Keysight N3300 Electronic load modules 11 – N3305A
Fixed Resistor for CV Ripple and Noise
4.4
W 5.5 kW