4 Operating the Power Supply Remotely
62 Series N8700 User’s Guide
Factory-shipped LAN Settings
The factory-shipped LAN settings documented in the following table
are optimized for connecting your power supply to a site network.
They should also work well for other network configurations.
The factory-shipped settings can be restored by pressing and holding
the front panel LAN button for three seconds. Pressing the LAN
button again while the message “LAn rES” is displayed resets the
LAN settings.
Factory-shipped non-volatile LAN settings
Get IP Address Automatic Alternate DNS server Blank
IP Address 169.254.57.0 Desired Hostname A-N87xxA-xxxxx
Subnet Mask 255.255.0.0 Description Keysight N87xxA (serial#)
Default Gateway 0.0.0.0 mDNS Enabled Enabled
DNS Server Address Configuration Automatic Password Blank
Preferred DNS server Blank
To Next Page
Loading...
