Security Features and Document of Volatility
SD Memory Card Removal Procedure
30
7 SD Memory Card Removal Procedure
When present, the SD Memory Card is located on the A4 Processor assembly.
However, it can only be accessed after the instrument’s disk drive is removed.
To remove the SD Memory Card:
1. Remove the disk drive by following the “Disk Drive Removal Procedure” on page 27.
Once the disk drive has been removed, the SD Memory Card is accessible.
2. Push in on the SD Memory Card and release. The Card springs back out, and can then
be removed. Figure 7-1 on page 31 below shows the instrument rear panel, with the
Disk Drive Assembly and SD Memory Card extracted from the instrument.
To Next Page
Loading...
Need help?
General
