28
SCPI Programming Fundamentals
Simple SCPI Communication Methods
Figure 2-6 Command Window and ipconfig Results
Enabling Telnet in Windows
In newer versions of Microsoft Windows (Windows Vista and Windows 7), the Telnet client is disabled by default. To
enable the Telnet client, do the following:
Communicating SCPI using Keysight Connection Expert
You can use Keysight Connection Expert to communicate with devices on any supported network type. Keysight
Connection Expert is installed as part of the Keysight I/O Libraries Suite.
Figure 2-7 below shows part of the Keysight Connection Expert main screen, with one N9020A instrument connected via
LAN.
Step Actions
1. Open Windows Control Panel From the Windows Start menu, select Control Panel.
2. Select Programs
3. Display Windows Features dialog In the Programs and Features group, click Turn Windows features on or off.
The Windows Features dialog appears.
4. Enable Telnet client In the listbox, locate Telnet client and check its checkbox.
Click OK.
To Next Page
Loading...
