Keysight PXA Series User Manual

4 Installation Note N9030-90058
Option EXM, External Mixing Upgrade Kit
Introduction
This kit includes parts to upgrade a PXA signal analyzer with frequency range option 503, 508, 513,
or 526 and serial number US/MY/SG51380000 or later or with frequency range option 543, 544, or
550 and serial number US/MY/SG51160000 or later to add option EXM, External Mixing. This kit
includes parts to upgrade a PXA regardless of frequency range option installed. As a result, some parts
included in this kit will not be needed for upgrading some analyzers.
In addition to installing the hardware to support option EXM, licenses for the following options will
also be installed:
• N9030A-EXM, External Mixing
• Licenses for core instrument software enhancements. For a list of these enhancements see:
http://www.agilent.com/find/N9030AK-R2C

Keysight PXA Series Specifications

General

Frequency Range	3 Hz to 50 GHz (depending on model)
Phase Noise	-136 dBc/Hz at 1 GHz and 10 kHz offset (typical)
Resolution Bandwidth	1 Hz to 10 MHz
Input Impedance	50 Ohm
Dimensions	177 mm (H) x 426 mm (W) x 470 mm (D)