Keysight U1233A - Changing the Beep Frequency; Figure 4-4 Changing the Beep Frequency

Multimeter Setup Options 4
Setup Menu Items
U1231A/U1232A/U1233A User’s Guide 87
Changing the beep frequency
The multimeter’s beeper alerts users to the presence of
newly sensed values for static recordings, sensed values that
are out of tolerance or limits set, and invalid key operations.
Use this Setup item to change the driving frequency of the
beeper (either 3.2, 3.4, 3.8, or 4.2 kHz), or to disable the
beeper (–.–)
Figure 4-4 Changing the beep frequency
Parameter Range Default setting
bF (3.2, 3.4, 3.8, 4.2) kHz or –.– (off) 3.8 kHz
Press
Press
Press
Press
Press
Press
Press
Press