Keysight U1233A - Freezing the Display (Trig Hold-Log and Auto Hold-Log); Trig Hold-Log Operation; Auto Hold-Log Operation; Figure 3-5 Trig Hold-Log Display

3Multimeter Features
Freezing the Display (Trig Hold-Log and Auto Hold-Log)
72 U1231A/U1232A/U1233A User’s Guide
Freezing the Display (Trig Hold-Log and Auto Hold-Log)
Trig Hold-Log operation
To freeze the display for any function, press the key.
Figure 3-5 Trig Hold-Log display
Press again to automatically update the display to
reflect data that was acquired during the hold.
Press and hold for more than 1 second to exit this
mode.
Auto Hold-Log operation
Pressing the for more that 1 second activates the Auto
Hold- Log function.
NOTE
Trig Hold-Log and Auto Hold-Log readings are recorded automatically for
future review or analysis by default. See “Recalling Previously Recorded
Readings (Recall)” on page 74 to learn more.
A
u
t
o
T
r
i
H
o
l
d
g
L
o
g
A
u
t
o
T
r
i
H
o
l
d
g
L
o
g
NOTE
The annunciator will flash while attempting to acquire a stable
reading.
A
u
t
o
T
ri
H
o
l
d
g
L
o
g
A
u
t
o
T
r
i
H
o
l
d
g
L
o
g