Multimeter Features 3
Making Scale Transfers (Scale)
U1231A/U1232A/U1233A User’s Guide 77
1 Press and hold while powering on the multimeter to
enable the Scale operation.
2 If successful, the annunciator is shown on the left of
the display. The multimeter automatically starts the
conversion of the selected Scale item for all voltage
measurements.
3 You can only change the selected Scale item from the
Setup menu. See “Changing the scale conversion value” on
page 96 to learn more.
4 The Scale operation is enabled until the multimeter’s
power is cycled.
To Next Page
Loading...
