Introduction 1
Keysight U1731C/U1732C/U1733C User’s Guide 35
Tolerance mode indicator for sorting L, C, or R
page 54
Tolerance set to 1% for sorting capacitance
Tolerance set to 5% for sorting capacitance
Tolerance set to 10% for sorting capacitance
Tolerance set to 20% for sorting capacitance
Data hold mode indicator page 56
Audible alert indicator for tolerance or limit mode page 85
Dissipation factor indicator
page 53
Quality factor indicator
Phase angle of impedance indicator
Secondary display -
Measurement units for the secondary display page 37
Impedance measurement indicator page 51
Inductance measurement indicator page 45
Capacitance measurement indicator page 47
Resistance measurement indicator page 49
Table 1-6 General annunciators (continued)
Legend Description Learn more on:
To Next Page
Loading...
