Need help?Do you have a question about the Keysight E4980AL and is the answer not in the manual?
General| Brand | Keysight |
|---|---|
| Model | E4980AL |
| Category | Measuring Instruments |
| Language | English |
Steps to verify the power supply, set up the fuse, and connect the power cable.
Covers operating environment, ventilation, ESD protection, and handle usage safety.
Procedures for powering the instrument ON/OFF and safely disconnecting it from the power source.
Details the names and functions of the front panel, rear panel, and screen display components.
Describes fundamental procedures for operating the E4980A/AL using menu keys and softkeys.
Details setting measurement function, impedance range, frequency, signal level, and DC bias.
Procedures for initializing the instrument and configuring settings via the MEAS SETUP page.
Explains how to configure comparator settings for bin sorting, including limits and modes.
Explains saving/recalling configurations to internal memory or USB, including auto recall.
Provides a flowchart for basic impedance measurement procedures.
Explains the 4TP configuration, measurement contacts, and contact resistance issues.
Details OPEN, SHORT, LOAD corrections, standard preparation, and parasitics.
Explains SCPI command structure, types, concepts, message grammar, and remote mode operation.
Sample programs for reading measurement results in ASCII and BINARY formats.
Details SCPI commands specific to the E4980A/AL, organized by function for easy reference.
Provides a flowchart for isolating primary troubles without disassembling the E4980A/AL.
Lists common troubleshooting checks for issues like no startup, abnormal display, or key failures.
Describes error messages displayed in the instrument status area and their categories.
To Next Page
