Keysight E4980A/AL Precision LCR Meter 27
Unpacking and Preparation
Environmental Requirements
1-
Protection Against Electrostatic Discharge (ESD)
Figure 1-7 shows the setup for a static-safe work station to protect the
electronic components from damage by electrostatic discharge (ESD).
Figure 1-6 Example of a static-free work station
Ensuring Adequate Free Space around the LCR meter for Immediate
Disconnection of the Power Cable in Case of Emergency
As described in “Disconnecting from the Supply Source” on page 29, the plug
attached to the power cable serves as the disconnecting device (device that
cuts off the power supply) for the E4980A/AL. When installing the E4980A/AL,
ensure that there is sufficient free space around the unit to permit quick
disconnection of the plug (from the AC outlet or the E4980A/AL unit) in case of
emergency.
To Next Page
Loading...
