Keysight E4980AL - System:communicate:lan[:Self]:Mac; System:communicate:lan[:Self]:Preset; System:communicate:lan[:Self]:Restart; System:communicate:lan[:Self]:Smask

374 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
E4980A/AL commands
10-
:SYSTem:COMMunicate:LAN[:SELF]:MAC?
Syntax :SYSTem:COMMunicate:LAN[:SELF]:MAC?
Description Returns the MAC address. (Query Only)
Equivalent key No equivalent key is available on the front panel.
:SYSTem:COMMunicate:LAN[:SELF]:PRESet
Syntax :SYSTem:COMMunicate:LAN[:SELF]:PRESet
Description Presets the network settings and restarts the network. (No Query)
Equivalent key [Preset} - LAN RESET - OK
:SYSTem:COMMunicate:LAN[:SELF]:RESTart
Syntax :SYSTem:COMMunicate:LAN[:SELF]:RESTart
Description Restarts the network (No Query)
This is available only for serial prefix number below:
MY464/SG464 and below for E4980A
MY542/SG542 and below for E4980AL
Equivalent key [System] - SYSTEM CONFIG - DHCP ENABLED - RESTART NETWORK
1
[System] - SYSTEM CONFIG - AUTO-IP ENABLED - RESTART NETWORK
1
[System] - SYSTEM CONFIG - IP CONFIG - RESTART NETWORK
2
[System] - SYSTEM CONFIG - MANUAL IP ADDR - RESTART NETWORK
[System] - SYSTEM CONFIG - MANUAL SUBNET MASK - RESTART NETWORK
[System] - SYSTEM CONFIG - MANUAL GATEWAY - RESTART NETWORK
:SYSTem:COMMunicate:LAN[:SELF]:SMASk
Syntax :SYSTem:COMMunicate:LAN[:SELF]:SMASk <String>
:SYSTem:COMMunicate:LAN[:SELF]:SMASk?
Description Sets the static Subnet Mask.
1. This key is for the firmware revision1.0x
2. This key is for the firmware revision 2.00 or later.