Keysight E4980AL - Function:dcresistance:range:auto; Function:dcresistance:range[:Value]; Function:dev[1-2]:MODE

350 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
E4980A/AL commands
10-
Equivalent key [Display Format] - MEAS DISPLAY - FREQ
[Meas Setup] - MEAS SETUP - FREQ
:FUNCtion:DCResistance:RANGe:AUTO
Syntax :FUNCtion:DCResistance:RANGe:AUTO {ON|OFF|1|0}
:FUNCtion:DCResistance:RANGe:AUTO?
Description Enables the auto range function for DCR measurement.
Parameter
Equivalent key [Meas Setup] - MEAS SETUP - DCR RNG - AUTO
[Meas Setup] - MEAS SETUP - DCR RNG - HOLD
:FUNCtion:DCResistance:RANGe[:VALue]
Syntax :FUNCtion:DCResistance:RANGe[:VALue] <numeric>
:FUNCtion:DCResistance:RANGe[:VALue]?
Description Selects the DCR measurement range. This command turns the auto range
function OFF.
Parameter
Equivalent key [Meas Setup] - MEAS SETUP - DCR RNG
:FUNCtion:DEV[1-2]:MODE
Syntax :FUNCtion:DEV[1-2]:MODE {ABSolute|PERCent|OFF}
:FUNCtion:DEV[1-2]:MODE?
Description
ON or 1 (Preset value) DCR measurement auto range ON
OFF or 0 DCR measurement auto range OFF
<Numeric>
Range 10|100|1k|10k|100k
Preset value 100
Unit ohms