Keysight E4980AL - System:beeper:tone; System:communicate:gpib[:Self]:Address

370 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
E4980A/AL commands
10-
Equivalent key [System] - SYSTEM CONFIG - BEEPER ENABLED - ON
[System] - SYSTEM CONFIG - BEEPER ENABLED - OFF
:SYSTem:BEEPer:TONE
Syntax :SYSTem:BEEPer:TONE <numeric>
:SYSTem:BEEPer:TONE?
Description Selects a beep sound tone.
Parameter
Equivalent key [System] - SYSTEM CONFIG - BEEPER TONE - TONE 1
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 2
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 3
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 4
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 5
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess
Syntax :SYSTem:COMMunicate:GPIB[:SELF]:ADDRess <numeric>
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess?
Description Sets the GPIB address.
Parameter
OFF or 0 (Preset value) Disables a beep sound
Description
<Numeric>
Range 1 to 5
Preset value 3
Resolution 1
<Numeric>
Range 0 to 30
Preset value 17