Keysight E4980A/AL Precision LCR Meter 169
System Configurations
SERVICE Page
5-
Monitor Information
The SERVICE page displays the following monitor information, which cannot
be edited on the SERVICE page.
Saving the System Information into External Memory
The system information of the E4980A/AL can be saved into external memory.
The system information may be useful for support and repair by Keysight
Technologies. For details on the system information, refer to the Service Guide.
For file locations on USB memory, see “Folder/File Structure on USB Memory”
on page 172
.
To save the system information into external memory:
Step 1. Insert a USB memory stick into the front USB port.
Step 2. Press [System].
Step 3. Press the SERVICE softkey.
Step 4. Press the MORE softkey.
Step 5. Press the SAVE SYS INFO softkey.
Step 6. While the data is being saved, a “PROCESSING...” message is shown on the
display. When the data has been saved into the USB memory, a “Storing data
completed.” message appears in the system message area.
Monitor
Information
Description
POWER ON Displays how many times the E4980A/AL has been started up as well
as its cumulative power-on time.
SYSCAL REV Displays the program revision of the adjustment for the E4980A/AL.
SYSCAL
DATE
Displays the date of the last adjustment for the E4980A/AL.
The system information of the E4980A/AL may be used for support and
repair by Keysight Technologies but will never be used for any other
purpose.
To Next Page
Loading...
