Keysight E4980AL - Using the Auto Recall Feature

Keysight E4980A/AL Precision LCR Meter 181
Save/Recall
Saving/Recalling Instrument Configuration States
6-
Using the Auto Recall Feature
Functional Description
You can have the E4980A/AL, at start-up time, automatically recall the
configuration states previously saved in register number 10 on USB memory.
To use this feature, you have to plug the appropriate USB memory into the
E4980A/AL before starting up.
To use the auto recall feature:
Step 1. Plug the appropriate USB memory into the E4980A/AL.
Step 2. Turn on the power to the E4980A/AL.
Step 3. Upon start-up, the instrument configures itself using the instrument
configuration information previously saved in register number 10 on the USB
memory device.