Keysight E4980AL - Fetch:smonitor:iac; Fetch:smonitor:IDC; Fetch:smonitor:vac; Fetch:smonitor:VDC

Keysight E4980A/AL Precision LCR Meter 347
SCPI Command Reference
E4980A/AL commands
10-
Description Returns a measurement result with the selected measurement function. See
the “Read Measurement Results” on page 290. (Query Only)
Equivalent key No equivalent key is available on the front panel.
:FETCh:SMONitor:IAC?
Syntax :FETCh:SMONitor:IAC?
Description Returns the latest measured data for the AC current monitor. In case of
Vdc-Idc measurement, 0 is returned. (Query Only)
Equivalent key No equivalent key is available on the front panel.
:FETCh:SMONitor:IDC?
Syntax :FETCh:SMONitor:IDC?
Description Returns the latest measured data for the DC current monitor. If the
current-level monitor is set to OFF, 0.0 is returned. (Query Only)
Equivalent key No equivalent key is available on the front panel.
:FETCh:SMONitor:VAC?
Syntax :FETCh:SMONitor:VAC?
Description Returns the latest measured data for the AC voltage monitor. In case of
Vdc-Idc measurement, 0 is returned. (Query Only)
Equivalent key No equivalent key is available on the front panel.
:FETCh:SMONitor:VDC?
Syntax :FETCh:SMONitor:VDC?
Description Returns the latest measured data for the DC voltage monitor. If the
voltage-level monitor is set to OFF, 0.0 is returned. (Query Only)
Equivalent key No equivalent key is available on the front panel.
:FORMat:ASCii:LONG
Syntax :FORMat:ASCii:LONG {ON|OFF|1|0}
:FORMat:ASCii:LONG?
Description Enables the long format (+0.0000000000E+00). This is applied to the returned
values of
:FETCh[:IMPedance][:FORMatted]?/:MEMory:READ?/*TRG.