Keysight E4980AL - Function:dev[1-2]:Reference:fill; Function:dev[1-2]:Reference[:Value]

Keysight E4980A/AL Precision LCR Meter 351
SCPI Command Reference
E4980A/AL commands
10-
Description Selects the deviation measurement mode.
Parameter
Equivalent key [Meas Setup] - MEAS SETUP - DEV A - ABS
[Meas Setup] - MEAS SETUP - DEV A - %
[Meas Setup] - MEAS SETUP - DEV A - OFF
[Meas Setup] - MEAS SETUP - DEV B - ABS
[Meas Setup] - MEAS SETUP - DEV B - %
[Meas Setup] - MEAS SETUP - DEV B - OFF
:FUNCtion:DEV[1-2]:REFerence:FILL
Syntax :FUNCtion:DEV[1-2]:REFerence:FILL
Description Executes a single measurement and enters two measured values (the primary
and secondary parameters) into each of the reference values for deviation
measurement. FUNC:DEV1:REF:FILL and FUNC:DEV2:REF:FILL are the
identical. (No Query)
The E4980A/AL operates in the same way with either DEV1 or DEV2.
Equivalent key [Meas Setup] - MEAS SETUP - REF A - MEASURE
[Meas Setup] - MEAS SETUP - REF B - MEASURE
:FUNCtion:DEV[1-2]:REFerence[:VALue]
Syntax :FUNCtion:DEV[1-2]:REFerence[:VALue] <numeric>
:FUNCtion:DEV[1-2]:REFerence[:VALue]?
Description Sets the reference value for deviation measurement.
Parameter
Description
ABSolute Sets the deviation measurement mode to “ABS”
PERCent Sets the deviation measurement mode to “%”
OFF(Preset value) Disables the deviation measurement mode
<Numeric>
Preset value 0