Keysight E4980AL - Output:DC:isolation:level:auto; Output:DC:isolation:level:value

366 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
E4980A/AL commands
10-
Parameter
Equivalent key [Save/Recall] - No. - SAVE
:OUTPut:DC:ISOLation:LEVel:AUTO
Syntax :OUTPut:DC:ISOLation:LEVel:AUTO {ON|OFF|1|0}
:OUTPut:DC:ISOLation:LEVel:AUTO?
Description Enables the auto range function for DCI.
Parameter
Equivalent key [Meas Setup] - MEAS SETUP - DCI RNG - AUTO
[Meas Setup] - MEAS SETUP - DCI RNG - HOLD
:OUTPut:DC:ISOLation:LEVel:VALue
Syntax :OUTPut:DC:ISOLation:LEVel:VALue <numeric>
:OUTPut:DC:ISOLation:LEVel:VALue?
Description Selects DC isolation range. This command turns the auto range function OFF.
Parameter
Equivalent key [Meas Setup] - MEAS SETUP - DCI RNG
<Numeric>
Range 0 to 19
Resolution 1
Description
ON or 1 (Preset value) Enables the auto range function for DCI
OFF or 0 Disables the auto range function for DCI
<Numeric>
Range
20 |200 |2 m|20 m|100 m
Preset value 20 m
Unit A