Keysight E4980AL - Output:DC:isolation[:State]; Output:hpower; Source:dcsource:state

Keysight E4980A/AL Precision LCR Meter 367
SCPI Command Reference
E4980A/AL commands
10-
:OUTPut:DC:ISOLation[:STATe]
Syntax :OUTPut:DC:ISOLation[:STATe] {ON|OFF|1|0}
:OUTPut:DC:ISOLation[:STATe]?
Description Enables DC Isolation.
Parameter
Equivalent key [Meas Setup] - MEAS SETUP - DCI ISO - ON
[Meas Setup] - MEAS SETUP - DCI ISO - OFF
:OUTPut:HPOWer
Syntax :OUTPut:HPOWer {ON|OFF|1|0}
:OUTPut:HPOWer?
Description Does nothing. This function is provided because of its command compatibility
with 4284A.
Parameter
Equivalent key No equivalent key is available on the front panel.
:SOURce:DCSource:STATe
Syntax :SOURce:DCSource:STATe {ON|OFF|1|0}
:SOURce:DCSource:STATe?
Description
ON or 1 Enables DC Isolation
OFF or 0 (Preset value) Disables DC Isolation
Description
ON or 1 Does nothing
OFF or 0 (Preset value) Does nothing