104 Keysight E4980A/AL Precision LCR Meter
Configuring Measurement Conditions (Display and Function Related Settings)
MEAS SETUP page
4-
DC Bias Current Monitor
Functional Description
The DC bias current monitor feature allows you to monitor the actual level of
the signal current across the DUT. The DC bias current monitor value is only
displayed in the IDC monitor area of the MEAS DISPLAY page.
To set up the signal voltage level monitor feature:
Step 1. Press [Meas Setup].
Step 2. Using the cursor keys, select the IDC MON field.
Step 3. Use the following softkeys:
Softkey Description
ON Turn ON the DC bias current monitor feature.
OFF Turn OFF the DC bias current monitor feature.
To Next Page
Loading...
