Keysight E4980AL - Function:smonitor:iac[:State]; Function:smonitor:IDC[:State]

354 Keysight E4980A/AL Precision LCR Meter
SCPI Command Reference
E4980A/AL commands
10-
Equivalent key The softkeys of [Display Format] - MEAS DISPLAY - FUNC field
The softkeys of [Meas Setup] - MEAS SETUP - FUNC field
:FUNCtion:SMONitor:IAC[:STATe]
Syntax :FUNCtion:SMONitor:IAC[:STATe] {ON|OFF|1|0}
:FUNCtion:SMONitor:IAC[:STATe]?
Description Does nothing. The E4980A/AL always has the AC current-level monitor turned
ON. This function is provided because of its command compatibility with
4284A.
Parameter
Equivalent key No equivalent key is available on the front panel.
:FUNCtion:SMONitor:IDC[:STATe]
Syntax :FUNCtion:SMONitor:IDC[:STATe] {ON|OFF|1|0}
:FUNCtion:SMONitor:IDC[:STATe]?
Description Enables the DC current-level monitor function.
GB Sets the Impedance Parameter Type to “G-B”
YTD Sets the Impedance Parameter Type to “Y-thd”
YTR Sets the Impedance Parameter Type to “Y-thr”
VDID Sets the Impedance Parameter Type to “Vdc-Idc”
1. This can be set only when option 001, 030, 050, 100 or 200 is installed.
Description
Description
ON or 1 (Preset value) Does nothing
OFF or 0 Does nothing
This is available when option 001 is installed.