Keysight E4980AL - Changing the Beep Tone

160 Keysight E4980A/AL Precision LCR Meter
System Configurations
SYSTEM CONFIG Page
5-
Changing the Beep Tone
Functional Description
The E4980A/AL allows you to change the beep tone to one of five levels.
To change the beep tone:
Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. Use the cursor keys to select the BEEPER TONE field.
Step 4. Change the beep tone by pressing the appropriate softkey:
Softkey Description
TONE 1 Selects tone 1.
TONE 2 Selects tone 2.
TONE 3 Selects tone 3.
TONE 4 Selects tone 4.
TONE 5 Selects tone 5.