24 Keysight E4980A/AL Precision LCR Meter
Unpacking and Preparation
Caution when Using the Handle
1-
Caution when Using the Handle
Follow the instructions below when using the E4980A/AL’s handle, otherwise
you may get your fingers caught in the handle or the E4980A/AL may fall and
be damaged
• When the handle is set up as shown in Figure 1-5, do not put any additional
weight onto the E4980A/AL or lift it suddenly.
• Do not touch the handle while the DUT is attached.
Figure 1-4 The handle in the set-up position
To Next Page
Loading...
