Keysight E4980A/AL Precision LCR Meter 25
Unpacking and Preparation
Environmental Requirements
1-
Environmental Requirements
Set up the E4980A/AL where the following environmental requirements are
satisfied.
Operating Environments
Ensure that the operating environment meets the following requirements.
Table 1-3 Operating Environments Requirements
Temperature 0ºC to 55ºC
Temperature range at
calibration
23ºC 5ºC (<1ºC deviation from the temperature
when performing calibration)
Humidity 15% to 85% at wet bulb temperature 40ºC
(non-condensation)
Altitude 0 to 2,000 m (0 to 6,561 feet)
Vibration Max. 0.5 G, 5 Hz to 500 Hz
The environmental requirements listed above are NOT for the
specifications and measurement accuracy of the E4980A/AL, but for its
operating environment.
To Next Page
Loading...
