20 Keysight E4980A/AL Precision LCR Meter
Unpacking and Preparation
Preparations before Use
1-
Preparations before Use
Verifying the Power Supply
Confirm that the power supplied to the E4980A/AL meets the following
requirements:
Setting up the Fuse
Please use the following fuse type.
UL/CSA type, Slo-Blo, 5x20-mm miniature fuse, 3 A, 250 V (Keysight part
number 2110-1017)
When you need a fuse, contact your nearest Keysight Technologies sales and
service office. To verify and replace the fuse, remove the power cable and pull
out the fuse holder.
Table 1-2 Power Supply Requirements
Requirements
Rated Voltage 100 - 240 VAC
Voltage 90 - 264 VAC
Rated frequency 50 / 60 Hz
Frequency 47 to 63 Hz
Maximum power consumption 150 VA
To Next Page
Loading...
