36 Keysight E4980A/AL Precision LCR Meter
Overview
Front Panel: Names and Functions of Parts
2-
USB memory type
Use USB memory that is USB mass-storage-class compliant and formatted
with FAT16 or FAT32. For points to notice, refer to “USB Memory Notes” on
page 173.
Interface: USB 1.1
14. Ground terminal
Connected to the chassis of the E4980A/AL. This is used for measurements
that require guarding.
15. DC Source terminal
Outputs the DC source in the range from -10 V to 10 V. Option 001 is required
for this function.
The DC source terminal is installed even in the E4980A/AL without Option
001; however, the E4980A/AL without Option 001 cannot use this terminal.
To Next Page
Loading...
