Keysight u2722a - Page 20

6 U2722A/U2723A Service Guide
1 Specifications
Performance characteristics
Noise 10 Hz to 20 MHz (Peak-peak)
Rise/fall time (ms)
[1]
U2723A USB Modular Source Measure Unit
For resistive measurement
[2]
± 1 μA15.0
± 10 μA5.0
± 100 μA1.0
± 1 mA 1.0
± 10 mA 1.0
± 120 mA 1.0
U2722A USB Modular Source Measure Unit
For resistive measurement
[2]
± 1 μA170.0
± 10 μA18.0
± 100 μA6.0
± 1 mA 1.0
± 10 mA 1.0
± 120 mA 1.0
[1] Drive 50% of 1 V or 10 V output with a resistive load. Rise time is from 10% to 90% of program voltage change at maximum
current. Fall time is from 90% to 10% of program voltage change at maximum current.
[2] Measurements obtained are per default bandwidth setting.
Voltage Range
Current range
1 μA 10 μA 100 μA 1 mA 10 mA 120 mA
2 V 50 mV 50 mV 50 mV 50 mV 30 mV 30 mV
20 V 50 mV 50 mV 50 mV 50 mV 30 mV 30 mV