EasyManuals Logo

Keystone KSTAD504F User Manual

Keystone KSTAD504F
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
When first using the dehumidifier, operate the unit continuously 24 hours. Make sure the plastic cover onthe continuous drain hose outlet install
stightly properly so there are no leaks.
This unit is designed to operate with a working environment between tween 5°C/41°F and 32°C/90°F,and between 30%(RH) and 80%(RH).
If the unit has been switched o and needs to be switched on again quickly , allow approximately three minutes for the correct operation to resume.
Do not connect the dehumidifier to a multiple socket outlet, which is also being used for other electrical appliances.
Select a suitable location, making sure you have easy access to an electrical outlet.
Plug the unit into a electrical socket-outlet with earthconnection.
Make sure the Water bucket is correctly fitted otherwise the unit will not operate properly.
NOTE
When the water in the bucket reaches to a certain level,please be careful to move the machine to avoid it falling down.
pump drain hose*1 pc
(For the unit with pump feature)
power cord bucket(1 pc)
female threaded end*1 pc
(on some models)
installation of the power cord bucket
Insert the power cord buckle
into the unit.
When using your product
Preparations for product use.
Accessories and power cord buckle installation
Accessories
10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keystone KSTAD504F and is the answer not in the manual?

Keystone KSTAD504F Specifications

General IconGeneral
BrandKeystone
ModelKSTAD504F
CategoryDehumidifier
LanguageEnglish

Related product manuals