Clean the Grille and Case
Care and Maintenance
Use water and a mild detergent. Do not use bleach or abrasives.
Do not splash water directly onto the main unit. Doing so may cause an electrical shock,
cause the insulation to deteriorate, or cause the unit to rust.
The air intake and outlet grilles get soiled easily, so use a vacuum attachment or brush to clean.
Care and cleaning of the dehumidifier Turn the dehumidifier o and remove the plug
from the wall outlet before cleaning.
Every few weeks, clean the bucket to prevent growth of mold, mildew and bacteria.
Partially fill the bucket with clean water and add a little mild detergent. Swish it around in the
bucket, empty and rinse.
Note: Do not use a dishwasher to clean the bucket. After clean, the bucket must be in place
and securely seated for the dehumidifier to operate.
Cover the unit with a plastic bag.
Store the unit upright in a dry, well-ventilated place.
CAUTION
DO NOT operate the dehumidifier without a filter because dirt and lint will clog it and reduce performance.
Clean the bucket
Remove the filter every two weeks based
on normal operating conditions.
To remove the filter, pull filter outwards.
Wash the filter with clean water then dry.
Re-install the filter, replace Bucket.
Clean the air filter
After turning o the unit, wait one day before emptying the bucket.
Clean the main unit, water bucket and air filter.
Wrap the cord with the power cord buckle.
When not using the unit for long time periods
How to clean & maintenance your product.
To Next Page
Loading...
Need help?
General
