EasyManua.ls Logo

Keystone KSTAP08MFC - AIR CONDITIONER SAFETY; Handling and Electrical Safety

Keystone KSTAP08MFC
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Do not use a liquid or corrosive detergent to clean the appliance
and do not splash water or other liquids onto it, otherwise it may
damage the plastic components, even causing electric shocks.
Do not operate the unit in a wet room such as the bathroom or
laundry rooms.
Do not touch the unit with wet or damp hands or when barefoot.
If your air conditioner is not fitted with a supply cord and a plug,
an all-pole switch must be installed in the fixed wiring, and the
distance between contact should be no less than 3.0 mm (do not
use an extension cord.)
Do not pull the unit by the cord.
Do not remove any part of the unit unless instructed by an
authorized technician.
Do not move the unit until the power has been cut off.
Do not operate the unit with a damaged plug or a loose socket.
Reset your power supply cord by pressing RESET button on the
LCDI plug.
- 3 -
AIR CONDITIONER SAFETY

Related product manuals