Maintenance
13
Safety Precautions
Maintenance Tips
-Always unplug the unit before cleaning or servicing.
-DO NOT use flammable liquids or chemicals to clean the unit.
-DO NOT wash the unit under running water. Doing so causes electrical
danger.
-DO NOT operate the machine if the power supply was damaged during
cleaning. A damaged power cord must be replaced with a new cord from
the manufacturer.
Clean the Air Filter
Clean the Unit
Store the unit when not in use
-Be sure to clean the air filter every 2 weeks for optimal
performance.
-The water collection tray should be drained immediately
after P1 error occurs, and before storage to prevent mold.
-In households with animals, you will have to periodically
wipe down the grill to prevent blocked airflow due to
animal hair.
Remove the air filter
Upper filter
(take out)
lower filter B
(take out)
lower filter A
Clean the unit using a damp, lint-free cloth and mild detergent. Dry the
unit with a dry, lint-free cloth.
-Drain the unit’s water collection tray according to the instructions in
the following section.
-Run the appliance on FAN mode for 12 hours in a warm room to dry
it and prevent mold.
-Turn off the appliance and unplug it.
-Clean the air filter according to the instructions in the previous section.
Reinstall the clean, dry filter before storing.
-Remove the batteries from the remote control.
Be sure to store the unit in a cool, dark place. Exposure to
direct sunshine or extreme heat can shorten the lifespan
of the unit.
(Press the grill down
slightly and pull the lower
filter A out at the same time)
To Next Page
Loading...
