Need help?Do you have a question about the KHADAS Tone2 and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| USB Interface | USB-C |
| Audio Formats Supported | PCM, DSD |
| Bit Depth | 32-bit |
| Sample Rate (DSD) | DSD256 |
| THD+N | < 0.0003% |
| SNR | > 120dB |
| DNR | > 120dB |
| Output Voltage (RCA) | 2.0Vrms |
| Output Voltage (4.4mm) | 4.0Vrms |
| Dimensions | 90mm x 60mm x 20mm |
| Output Ports | RCA, 3.5mm, 4.4mm |
| Sample Rate (PCM) | Up to 384kHz |
| Output Level (3.5mm) | 2V RMS |
| USB Audio Class | UAC2.0 |
Details the Balanced RCA, S/PDIF, and USB-C ports for audio and power.
Describes the Volume Knob, Power LED, and RGB LED light for operation.
Download and install the ASIO driver for enhanced audio performance.
Reboot your computer to activate the newly installed USB driver.
Obtain the latest tool for firmware flashing.
Get the most recent firmware file for the Tone2.
Connect Tone2 via USB-C and use the DFU tool to update firmware.
Power off and restart the Tone2 to apply the new firmware.
Connect to amplifier/speakers via balanced analog output.
Connect to CD players or digital sources via coaxial input.
Use with 'Khadas BT Magic' for Bluetooth audio reception.
Connect computers, smartphones for data and power.
Describes signal types for balanced RCA ports with different cables.
Details the S/PDIF coaxial input and its signal handling.
Recommended for linear power supplies via USB-C I2S port.
For power from smartphones, PCs, or SBCs via USB-C USB port.
Functions triggered by single, double, triple, or long presses of the volume knob.
Functions triggered by rotating the volume knob clockwise or counter-clockwise.
Indicates power supply status via USB-C (I2S) or USB-C (USB).
Explains the multi-color ring light for various device statuses.
Shows volume levels and mute status using turquoise light.
Indicates track status (e.g., playback, skip) using red light.
Displays input source (USB, S/PDIF, 12S, AUTO) using yellow and red lights.
Shows digital filter modes using blue and red lights.
Indicates DSD audio sample rates (64, 128, 256, 512) using white light.
Indicates PCM audio sample rates (44.1K-768K) using yellow light.
Indicates when the encoder knob is locked, flashing white.
Shows the device power off state using grey light.
Covers driver needs, RCA/Bluetooth/USB connections, and device compatibility.
Explains Auto mode priority, USB-C phone power, and I2S port powering.
Discusses RCA voltage, TV input, and HID volume adjustment specifics.
Solutions for unresponsive volume knob and power LED problems.
Fixes for computer not detecting Tone2 or no sound output.
Addresses sound problems with S/PDIF and HID volume control malfunctions.
Detailed performance metrics for balanced RCA line-out.
Detailed performance metrics for single-ended RCA line-out.
To Next Page