EasyManuals Logo

KHE AUDIO ELECTRONICS ACS 4x4 FX User Manual

Default Icon
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
KHE ACS SERIES – USER MANUAL www.KHE-AudioElectronics.com 2 / 23
For reasons of the product liability, we are obligated to make clear certain safety aspects which must not be
ignored under any circumstances:
- Read, retain, and follow all instructions. Heed all warnings.
- To prevent damage, fire or shock hazard, do not expose this unit to rain or moisture. Do not use this
product near water or any other liquids.
- This product should be located away from heat sources such as radiators, heat registers, etc.
- Unplug the power supply before cleaning the unit exterior. Use a dry cloth only. Wait until the unit is
completely dry before reconnecting it to the power supply.
- Maintain unobstructed air space behind and above the unit for proper ventilation and cooling.
- Protect the power supply and all attached cables from being pinched or abraded.
- The power supply of this product should be unplugged from the outlet when left unused for a long
period of time or during storm weather.
- Use only the power supply supplied with the unit.
- Install in accordance with the manufacturer's instructions
- Keep these instructions for future reference.
CAUTION: If the unit becomes physically damaged due to dropping or for other reasons, it should be returned
to the factory for repair to avoid the risk of further damage to the unit or to attached units. No user serviceable
parts inside. Warranty is void if device gets modifyed by unauthorized personal. In case of malfunction or
mechanical damages, please contact KHE Audio Electronics for further assistance.
By purchasing and using this product, you clearly understand that you are taking full responsibility for the use
of this product.
KHE Audio Electronics accepts no responsibility (consequential or inconsequential) for damage or injury caused
by improper connections, improperly grounded amplifiers, user error, or injury caused by failure of the ACS or
any component inside the ACS. Use of the ACS implies that the owner/user clearly understands and agrees to
all of the terms stated within this user manual, has decided to use the ACS under these terms, accepts full
responsibility for any damage or injury, and waives his/her rights to a liability claim against KHE Audio
Electronics (or associated companies or directors) for any damage or injury caused while using the ACS. As it
is impossible for KHE Audio Electronics to ensure the user is following these instructions, the user must take
full responsibility in the suitability of purchasing a KHE product for his or her use.
The device serves for routing guitar and amplifier signals as well as for controlling amplifiers, speaker cabinets
and load boxes, and must be used exclusively for this purpose.
KHE AUDIO ELECTRONICS IS NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR AMPLIFIER THAT MAY OCCUR IN
CONNECTION WITH ANY USE OF THE ACS.
SAFTEY PRECAUTIONS
WARNING & LIABILITY NOTICE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KHE AUDIO ELECTRONICS ACS 4x4 FX and is the answer not in the manual?

KHE AUDIO ELECTRONICS ACS 4x4 FX Specifications

General IconGeneral
BrandKHE AUDIO ELECTRONICS
ModelACS 4x4 FX
CategorySwitch
LanguageEnglish

Related product manuals