To Next PageTo Next Page
Need help?Do you have a question about the KHE AUDIO ELECTRONICS ACS Series and is the answer not in the manual?
General| Brand | KHE AUDIO ELECTRONICS |
|---|---|
| Model | ACS Series |
| Category | Switch |
| Language | English |
Key safety aspects must not be ignored for product liability.
Explains cautions for damaged units and user responsibility for product use.
User accepts responsibility for damage/injury, waives claims against KHE Audio Electronics.
Device for routing guitar/amp signals, controlling amps, cabinets, and load boxes.
Introduces the ACS as a switching and routing system for guitar amps and cabinets.
Highlights ACS applications and the 7 switchers in the series.
Essential rules to prevent damage to the ACS or connected equipment.
Explains controls for enabling/disabling amplifiers and cabinets, including LED indicators.
Describes the FX, CTRL, and Power switches and their LED status indications.
Details the dual guitar inputs and their compatibility with various pedals.
Explains instant switching between mono guitar amplifiers without interruption.
Covers connecting amplifiers to the ACS and important compatibility notes.
Explains switching between load devices like cabinets and load boxes.
Details connecting load devices and compatibility with various load types.
Allows using a power attenuator across all amps simultaneously.
Step-by-step guide to activating and connecting the attenuator insert.
Enables sharing effect pedals like delays and reverbs across multiple amps.
Covers connecting FX-loops and effect pedals, and gain staging considerations.
Provides a buffered signal to a guitar tuner or for recording DI tracks.
Connects DI output from DAW to the GUITAR INPUT for re-amping.
Activates Ground Lift via Setup Menu to eliminate hum and buzz.
Automatically loads the last activated configuration on start-up.
Provides a step-by-step guide for setting up the ACS system initially.
Outlines the recommended sequence for powering on the ACS and connected amplifiers.
Details the basic desk-style amp switcher for 4 amps and 2 cabinets/loads.
Covers the 19" 1u format switchers for 4 amps/4 cabinets, with FX-loop feature.
Details the 19" 1u switcher for 8 amps and 4 cabinets/loads.
Details the 8-amp, single-cabinet switcher and its connection points.
Describes the 8-cabinet, single-amplifier load switcher and its connections.
Explains the AFX 8 for expanding FX-loop switching for ACS 8x4 and ASX 8.
A table comparing features across different ACS models.
Details how to set the MIDI channel (1-15) for controlling the ACS.
Explains using MIDI PC for presets and CC for single commands to control functions.
Allows daisy-chaining up to 15 switchers for massive setups.
Step-by-step guide for linking switchers, including cables and power.
Illustrates various setups by linking different ACS models.
Instructions on how to access and leave the system configuration menu.
Details system functions and MIDI channel settings within the setup menu.
Covers input buffer, using amps without load, load detection, and resistors.
Discusses built-in effects, pedal placement, cable types, and labeling.
Covers power source, PE/Earth connection, and potential ground loops.
Details system reset procedure and multi-room setup possibilities.
Lists rack space, dimensions, weight, power supply, and performance specs.
Outlines the 2-year warranty, limitations, and technical support contacts.
Details EMC, Safety standards, FCC Class B statement, and CE marking.
Provides guidelines for environmentally friendly disposal of electronic waste.
