Fig. 152: Testing Sending Unit
Courtesy of KIA MOTORS AMERICA, INC.
INSTALLATION
ENGINE COOLANT HOSE/PIPES
After inserting O-ring into a groove at the lower part of water inlet pipe, soak O-ring in water and insert it into
the water inlet pipe.
CAUTION:
z Be careful not to smear oil or grease on the water pipe O-ring.
z Pay attention not to let a foreign object get into the connecting part
of the water pipe.
z Insert the water pipe up to its end part.
2002 Kia Sedona EX
2002 ENGINES 3.5L V6 - Sedona
Helpmelearn
June-06-08 8:54:33 AM Page 154 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...