Fig. 166: Disconnecting Wiring Harness
Courtesy of KIA MOTORS AMERICA, INC.
10. Remove the water outlet fitting and gasket.
11. Remove the thermostat.
INSPECTION
1. Surge tank
a. Inspect the surge tank for damage and crack, if necessary, replace it.
b. Check if coolant passage is blocked.
c. Inspect the mating surface for warpage using a straight edge or filler gauge.
Standard value: 0.15 mm (0.006 in)
Service limit: 0.2 mm (0.008 in)
2002 Kia Sedona EX
2002 ENGINES 3.5L V6 - Sedona
Helpmelearn
June-06-08 8:54:33 AM Page 168 © 2005 Mitchell Repair Information Company, LLC.
To Next Page
Loading...