Kia 3.5L V6 - Illustrating Bearing Caps Identification Mark Chart; Illustrating Bearing Caps Identification Marks

Fig. 70: Illustrating Bearing Caps Identification Mark Chart
Courtesy of KIA MOTORS AMERICA, INC.
Fig. 71: Illustrating Bearing Caps Identification Marks
Courtesy of KIA MOTORS AMERICA, INC.
6. Tighten the bearing cap in two or three steps. Tighten it to the standard torque at the last stage.
Bearing cap standard torque:
16 pieces at the both ends: 21-26 N.m (210-260 kg-cm., 15-19 ft.lbs.)
24 pieces in the middle: 10-12 N.m (100-120 kg.cm, 7.38-8.85 ft.lbs.)
2002 Kia Sedona EX
2002 ENGINES 3.5L V6 - Sedona
Helpmelearn
June-06-08 8:54:30 AM Page 71 © 2005 Mitchell Repair Information Company, LLC.