4125
Features of your vehicle
High Beam Assist (HBA)
(if equipped)
The high beam assist is a system that
automatically adjusts headlamp range
(switches between high beam and low
beam) according to the brightness of
other vehicles and road conditions.
Operating condition
1.Place the light switch in the AUTO
position.
2.Turn on the high beam by pushing the
lever away from you.
The high beam assist indicator will illu-
minate.
3.The High Beam Assist will turn on
when vehicle speed is above 45km/h.
4.If the light switch is placed to the head-
light position, the high beam assist will
turn off and the low beam will be on
constantly.
The high beam switches to low beam in
the below conditions.
- When headlight is detected from on-
coming vehicle
- When tail light is detected from the
front vehicle.
- When streetlight or other light is
detected.
- When the high beam assist turns off
- When vehicle speed is below 35km/h
OPS043238
CAUTION
The system may not operate normal-
ly in the below conditions.
• When the light from on-coming or
front vehicle is not detected
because of lamp damage, hidden,
etc.
• When the lamp of the on-coming
or front vehicle is covered with
dust, snow or water.
• When the light from on-coming or
front vehicle is not detected
because of exhaust fume, smoke,
fog, snow, etc.
• When the front window is covered
with foreign matters such as ice,
dust, fog, or is damaged.
• When there is a similar lamp with
the front vehicle’s lamps
• When it is hard to see because of
fog, heavy rain or snow.
To Next Page
Loading...
