Driving your vehicle
705
Operation
• If a traffic sign that is relevant to your
vehicle is passed, the system displays
the information of the speed limits and
no passing restrictions to the driver.
• When the driver turn on the ignition,
the system displays stored information
of the speed limit before turn off the
ignition.
• Sometimes different speed limits are
displayed for the same road. The infor-
mation displayed depending on the sit-
uation. Because, traffic signs with addi-
tional sign (e.g rainy, arrow...) are also
detected and compared with vehicle
interior data(e.g wiper operation, turn
signal...).
• The system can update the speed limit
information without visible speed limit
signs in the following situations.
- When you change your driving direc-
tion with right or left or U turning.
- When vehicle changes roads. (e.g.
from highway to country road…)
- When you enter or exit into town or
village.
✽✽
NOTICE
If speed limit value has the difference
between cluster and navigation, check
the speed unit setting in navigation.
Display
• If the system doesn’t have a reliable
speed limit information, the following
symbol is displayed in both the instru-
ment cluster and navigation screen.
WUM-203
■ No reliable speed limit information
OJD055173L
To Next Page
Loading...
