Driving your vehicle
765
Second stage alert
A warning chime to alert the driver will
activate when:
1. A vehicle has been detected in the
blind spot area by the radar system
(the warning light will illuminate on the
outside rearview mirror) AND
2. The turn signal is applied (same side
as where the vehicle is being detect-
ed).
When this alert is activated, the warning
light on the outside rearview mirror will
also blink.
If you turn off the turn signal indicator, the
warning chime will be deactivated.
- The second stage alarm can be deac-
tivated.
• To activate the alarm:
Go to the User Settings Mode →
Sound and select "BSD" on the LCD
display.
• To deactivate the alarm:
Go to the User Settings Mode →
Sound and deselect "BSD" on the LCD
display.
Non-operating condition
The sensors are located inside of the
rear bumper.
Always keep the rear bumper clean for
the system to work properly.
OJD055060
2st stage
CAUTION
The alarm function helps alert the
driver. Deactivate this function only
when it is necessary
OJD055058
To Next Page
Loading...
